Introduction:
- Our TMS2 product is a power-on delay type DIN rail timer relay. An on delay timer is a switch used to delay the start of a load, there is a set time interval between the power on time and the load on time.
- This DIN rail timer relay has delay times of 1 second, 5 seconds, 15 seconds, 30 seconds, 60 seconds, 10 minutes, 30 minutes and 1 hour and is adjustable 0-100%. For example, you set the first dial is 5 seconds, second dial 50%, the delay time is 5*50%=2.5 seconds.
- Compared with our TMM1 programmable multi-function timer relay, it is more economical and simpler to operate due to its single function.
- This product is very space-saving, with a width of only 18mm, and many pieces can be fixed on a 35mm DIN rail.
- The contact type can be SPDT(1 NO+1 NC, 5A), SPDT(1 NO+1 NC, 16A), DPDT(2 NO+2 NC, 5A), SPST(1 NO, 16A). Please contact us for recommendations for your applications.
- Want to get the latest pricing or technical support from us for this TMS2 DIN Rail Timer Relay? Fill out the form below to contact us today!
TMS2 DIN Rail Timer Relay Timing Chart:
Specifications:
| Model | TMS2 |
| Working voltage | 24-240VAC/DC |
| Time delay range | 0-1 hour(selection through dial) |
| Setting accuracy | ±10%±100ms |
| Repeatable accuracy | ±0.2%±50ms |
| Power-up repetition interval | >=0.2s |
| Rated insulation voltage | AC415V |
| Utilisation category | AC-15 |
| Contact capacity | SPDT(1 NO+1 NC, 5A), SPDT(1 NO+1 NC, 16A), DPDT(2 NO+2 NC, 5A), SPST(1 NO, 16A) |
| Electrical durability | 100000 cycles |
| Mechanical durability | 1000000 cycles |
| Pollution degree | 3 |
| Degrees of protection | IP20 |
| Uimp | 4kV |
| SCPD | NT00-6A |
| Power consumption | AC:<=1W DC:<=0.5W |
| Storage temperature | -25-55℃,Up to 70℃ in a short time (24h) |
| Permissible relative humidity | <=50%(40℃)(No condensation) |
| Operation temperature | -10-50℃ |
| Height above sea level | <=2000m |
| Installation | DIN rail mounting |
