M12 Thread Size, 5VDC Inductive Proximity Sensor Introduction:
- Lorentzzi® M12 Inductive Proximity Sensor is a high quality and economical proximity switch with an operating voltage as low as 5VDC. Normal proximity sensors operate at 6-36VDC or AC90-250V, this 5VDC sensor is a custom proximity sensor.
- The “M12” here means its nickel-plated brass thread diameter is 12mm, and its overall size is M12*35.5mm (excluding cable).
- The default cable length is 2 meters, but if you want to extend this cable length, please contact us for customization.
- This M12 sensor can only be a non-shielded sensor, and its maximum detection distance is 4.0mm.
- This inductive proximity sensor is designed to detect metal objects without contact, it is a contactless inductive switch.
- In addition, the sensor has short circuit and reverse polarity functions, which will not damage the M12 sensor if the sensor is miswired.
- Besides, it also has a large and clear LED working indicator light. When the sensor is in normal working condition, the LED will light up, letting us know its working status clearly.
- The output is only 5VDC, 300mA, however, if you want to extend its load capabilities, you can use this sensor with our DC/AC SSRs to control heavy loads.
Specifications:
Non-flush | Detection distance | 4mm | ||
DC5V | NPN | NO | LM12-3004NAT-5VDC | |
NC | LM12-3004NBT-5VDC | |||
NO+NC | ||||
PNP | NO | LLM12-3004PAT-5VDC | ||
NC | LM12-3004PBT-5VDC | |||
NO+NC | ||||
two wire system | NO | |||
NC | ||||
AC90-250V | Controllable silicon | NO | ||
NC | ||||
NO+NC | ||||
Relay output | ||||
Control output | DC | 200mA | ||
SCR/Relay | ||||
Output current | DC type: 300mA max | |||
Consumption current | <15mA | |||
Standard detected object | 15×15x1(A3 iron) | |||
Repeated precision | 0.01 | |||
Response frequency | 400Hz | |||
Working environment temperature | -25℃~65℃ | |||
Insulation resistance | 50MΩ | |||
Shell material | Nickel-plated brass | |||
Protection grade | IEC standard IP 67 |