SSR 60DA 60A DC AC Katı Hal Rölesi

SSR 60DA 60A DC AC Solid State Relay Introduction:

• Lorentzzi® SSR-60DA is a single-phase 60 amp DC to AC solid state relay. “DC to AC” means that we can use a small DC 3-32 V voltage to indirectly operate an AC 24-480 V load instead of directly turning on/off the AC load.
• Its maximum load current reaches 60 amps, and its load section has been calculated to easily run a 6000 W resistive load such as a heating element.
• Solid state relays are widely used in heating systems with PID temperature controllers to accurately control temperature. We also offer various types of sıcaklık kontrolörleri.
• Because this SSR-60DA Solid State Relay controls a heavy load, it can get very hot during operation. If it is always working at a temperature above 80℃, its service life will obviously be reduced, so a W-100 radiator should be used to cool it.
• Compared with common EMR(electromagnetic relay) or AC contactor, this SSR-60DA product features long life time, high stability, no noise, and no spark advantages.
• Also, to avoid overload issues, a fast fuse should be used between the SSR and the load, and for this 60A SSR, the fast fuse current should be equal to or slightly higher than 60 amps.

Özellikler: