SSR 25DD 3-32VDC Input DC Solid State Relay Introduction:
- Lorentzzi® SSR-25DD is a 25 amps DC to DC solid state relay, DC to DC SSR uses 3-32VDC to turn on or off a load of high DC voltage.
- This solid state relay control voltage is 3-32VDC, load voltage can be a DC voltage between 5-220V.
- The SSR-25DD has a maximum current of 25 amps and is primarily designed for use with DC heaters up to 2500 watts. In addition, we can also use it to control other DC devices such as DC motors, lithium or lead-acid batteries, solar photovoltaic systems, etc.
- As the SSR-25DD product current is small, and can only run small power devices, if it can’t meet your requirement, we can also provide high current SSR-40DDD, SSR-60DD أو SSR-100DD products.
- Lorentzzi is a Chinese solid state relay manufacturer who has produced various kinds of SSRs for many years with abundant production experience.
- تطبيق موزع التيار المستمر هذا مثل:
- In temperature control systems, DC SSR can switch DC heaters or coolers on and off based on sensor inputs to maintain desired temperature,
- In battery management systems, DC SSRs are employed for battery management, including charging, discharging, and balancing operations.
- In renewable energy devices, DC SSR can control wind turbines and hydroelectric generators for switching and controlling DC power output.
- وهكذا دواليك.
- Need more information, please fill the below form to contact us to get this SSR price and more.
التطبيق:
المواصفات:
| الوضع | SSR 25DD |
| جهد التحكم | 3-32 فولت تيار مستمر |
| الحد الأقصى لتيار التحكم الأقصى | 40 مللي أمبير |
| جهد التشغيل | 3 فولت تيار مستمر |
| إيقاف تشغيل الجهد الكهربائي | 2 فولت تيار مستمر |
| جهد التحميل | 5-220 فولت تيار مستمر |
| ذروة جهد الحمل | 250 فولت تيار مستمر |
| تيار الحمل | 25 A |
| الحد الأقصى لتيار التسرب خارج الحالة | 2 مللي أمبير |
| الحد الأقصى لانخفاض الجهد في الحالة القصوى | ≤1 فولت تيار مستمر |
| بُعد المنتج | 44.8 * 57.4 * 28 مم |
| الوزن الصافي | 100 g |
| القوة العازلة (المدخلات إلى المخرجات) | 4000 V |
| القوة العازلة (من المدخلات إلى المخرجات إلى القاعدة) | 2500 V |
| درجة حرارة التشغيل | -30℃~80℃ |
| التصديق | م |
| المحطات الطرفية | برغي |
| ملاحظة | عند استخدام هذا SSR، يُرجى مراعاة استخدام مشتت حراري مناسب للمساعدة في تبريده، وإلا فإن درجات الحرارة العالية التي تتجاوز 80 درجة مئوية ستسبب تلفًا دائمًا لمخزن SSR. |








